The new Storm Drain Defender for Curb Inlet Drains, is a temporary solution for Type 1 basins with a man hole cover and no grate. The insert hangs from a wire frame that is held in place in the opening by a simple support bar. This catch basin insert will trap leaves, debris, sediment and pollutants that are carried by storm water into the drainage system, reducing the amount of pollutants that enter the waterway.
Specifications:
Part # DDCI - Storm Drain Defender Curb Inlet Unit
Size - Adjusts to Curb Inlet Drain Opening: smallest 22" wide up to 26" wide. Depth is approx 24".
Material - Standard Fabic 8 oz Polypropylene, Non-Woven Geotextile fabric.
Flow Rate - Maximum overflow rate varies depending on the level of debris and sediment that has accumulated in the fabric. Proper maintenance in mandatory to maintain maximum water flow. The Storm Drain Defender units have overflow outlets to allow excessive water during heavy rain showers to bypass the system, reducing the chance of flooding or ponding.
Removes - Oil, Grease, Sediment, Litter, Debris
Disposal - Disposal in dependent on the nature of pollutants being collected. Disposal must be in accordance with local, state and federal regulations.
Weight - Empty - Storm Drain Defender Curb Inlet units weigh approx 3 pounds. Full = Weight of empty unit plus weight of sediment and water trapped in unit. Dry sediment could weight 30 - 50 pounds. Fully loaded, wet units can weight approx 85-135 pounds.
Freight quotes are estimates only and do not include fuel surcharges that change daily. Actual rate may vary.
