Storm Drain Defender-Round

Storm water runoff carries with it dirt and hydrocarbons that pollute our downstream supplies. The STORM DRAIN DEFENDER traps these pollutants, reducing and controlling the entrance of contaminants into our water systems.

The STORM DRAIN DEFENDER - U.S. Patent No. 7,201,843 - is a simple sheet of geotextile fabric supported by a wire frame. The standard round models adjust to fit round drains size 27" - 29" in diameter. The entire unit is under the grate, no excess fabric extends above the grate, creating a safer environment for pedestrians. No trimming required.

Specifications:

• Size: Round—Adjusts from 27” to 29” diameter. The single fabric sheet is 4’x5’. The depth varies, depending on the size of the drain and how deep the fabric hangs down.
• Material: Standard Fabric—8 oz Polypropylene, Non-Woven Geotextile Fabric
• Trash Units—High Density Polyethylene Tarp Screening
• Flow Rate: Maximum overflow rate varies depending on the level of debris and sediment that has accumulated in the fabric. Proper maintenance is mandatory to maintain maximum water flow.
• The STORM DRAIN DEFENDER units have overflow outlets to allow excessive water during heavy rain showers to bypass the system, reducing the chance of flooding or ponding.
• Removes: Oil, Grease, Sediment, Litter, Debris
• Disposal: Disposal is dependent on nature of pollutants being collected. Disposal should be in accordance with local, state and federal regulations.
• Weight: Empty = STORM DRAIN DEFENDER units are approx. 2—3 lbs. Full = Weight of empty unit plus weight of sediment and water trapped in unit. Dry sediment could weigh 30-50 pounds. Fully loaded, wet units can weigh approximately 85-135 pounds.

Freight quotes are estimates only and do not include fuel surcharges that change daily. Actual rate may vary.